Marketplace for Mechanical & Electrical Industry

Agricultural crawler transport vehicle small Mini Dumper for sale

operating specification

1、The correct way to start is to close the main power switch and open the start key switch.(Make sure the main switch is closed after each drive)

2. The correct driving mode of the vehicle is: press the clutch, and hang the gear.Release the clutch vehicle movement.

3. Notes for vehicle unloading function:

Unloading is strictly prohibited when the vehicle is driving state.The machine shall be placed in the neutral condition.The lifting lift should not exceed the last section of the hydraulic top.Prevent the car bucket from rising excessively.

4. When the vehicle turns, do not pull the pull rod to the end, to take more pull less steering mode, avoid sharp turn, heavy load state turn is strictly prohibited, turn in place, check the drive pull rod lock screw is loose, whether there is a gap, adjust at any time

Elements of engine maintenance

● 1. Change the oil in 20 hours for the first time, and replace it according to the instructions according to the use time.

● 2, the national standard for engine oil diesel engine special CD40 or CF.

● 3. Air filter, take it out for three to five days and blow it times, according to the dust size.

● 4. The oil is normally added to one-third of the oil ruler scale, and about two-thirds of the oil ruler is tightened.

● 5, the oil filter should be often cleaned with diesel oil or gasoline, remember not to use water.

● 6. Each pressure relief valve must be pressed to protect the motor gear.

● 7. The fuel tank cover must be tightened after refueling to avoid white smoke from the diesel water intake engine.

● 8, the new machine at low speed and medium speed and high speed are run-in for one hour.

● 9. The use environment must be kept well ventilated.

Elements of gearbox maintenance

1. Replace 68 # anti-wear hydraulic oil for 15 days.The second one-month replacement, and the subsequent regular replacement according to the actual situation.

● 2. The clutch must be pulled to switch to avoid damaging the gear and fork.

● 3. When steering, the other steering lever must be back to the position before turning again.

● 4. Check the fixed drive shaft arm screws regularly.

Precautions for crawler

● 1. Complex slope section, pay attention to avoid sharp objects scratching tracks.Cross-section strain of the crawler, not within the scope of three guarantees.

● 2. Relax and adjust the track according to the road conditions and real-time conditions to prevent the track from falling off.

● 3. Regularly check the fixed screws and bearing bearings to avoid lax shaking, and regularly add butter lubrication to avoid wear.

● 4. Clean up the hard objects in the track every day to avoid wear.Various branch heavy wheels, guide wheels, floating wheels, tugs, any damage except for casting defects are not within the three packages

● It is strictly prohibited to turn in situ in the case of heavy load.

● vehicle lines, lamps, switches, batteries, glass and all man-made accidents are not within the scope of the three guarantees.

● is strictly prohibited from loading and unloading goods on the slope road, so the safety accidents have nothing to do with the manufacturer.

● three guarantees of warranty period, except for the parts not within the three guarantees, the other parts are counted within three months from the date of car purchase.

● should read this instruction carefully before use. If you have any questions, please call.